Tag Archives: shipyard

Wood to White

Or more appropriately titled:

“The work continues and we better hurry up because spring is coming!”

It might not seem like a very lofty personal mantra, but as the short winter days begin to gradually lengthen, and the signs of spring abound (blooming forsythia, eager daffodils by the trail to the shop, and robins returning en masse), my ‘raison d’être’ is “wood to white“.

Whilst I was (humbly) fooling around on numerous invisible tasks around the boat and the Mothership Adventures office, Luke (AKA Glamour Boy) was diligently proceeding with the master project for the winter. Once the basic structure for the aft deck roof was in place, the next step was to cover the beams in plywood.

Sounds easy, right?

Wrong.

The 8′ sheets of plywood had to be scarf joined together, at which point we had an “epoxy guru” come to teach us how to encase the 8′ x 16′ plywood sections with fiberglass cloth and epoxy resin. As the glue does not like the cold, we moved the process up into the workshop. The first night, it took us 4 hours to coat one side of the first panel.

With 9 panels to go, it seemed Glamour Boy and I were going to be spending a lot of time together.

IMGP6588

Here, “Epoxy Guru” Josh attempts to impart his high standards upon our crew. No air bubbles or dry spots, no wrinkles, no lumps, no areas too flooded, super accurate measuring of the glue, mixing for precisely the right amount of time.

Gee, it was like Epoxy Boot-Camp.

IMGP6591

Epoxy is not the nicest stuff; so it was a respirator and glove affair for sure.

IMGP6594

After the first night, in an effort to speed up the process, we carried the table saw, thickness planer and stationary sander out of the shop so we could squeeze a second panel in. This allowed us to coat two panels a night (after a regular days work on the Columbia III).

IMGP6605

Epoxy resin likes summer temperatures, so we kept the shop fire going 24 hours a day for 3 weeks trying to get the glue to set hard enough to allow us to sand it smooth. It worked out fine in the end, but we couldn’t rush the curing time.

Here, Tavish sands and trims a panel, the final step before it’s ready to install.

IMGP6650

Step #436,545: The panels are finally ready to leave the shop.

IMGP6651

Step #436,546: Panels go into the boat shed.

IMGP6652

It was another big step to get the panels trimmed to the correct width (about 39″).

IMGP6647

They were first glued into place, then trimmed to size.

IMGP6653

It was then the panels began to resemble a roof!

IMGP6696

Luke completes a few finishing touches to the laminated beam at the back.

IMGP6692

He then sealed all the joints with fibreglass cloth. The entire vertical edge of the structure was covered in bi-axial fiberglass cloth and epoxy resin to ensure there was a totally waterproof membrane protecting the new roof structure.

IMGP6711

This kind of work has lots of little side-steps. Luke custom manufactured 2 stainless steel downspouts that were embedded in the roof.

IMGP6728

IMGP6739

Normally this kind of rainwater drain would be a very likely source of rot on a wooden boat, which is why so much energy was expended to ensure this was very water-proof.

IMGP6751

The next step was to transport the gorgeous clear yellow cedar accumulated for the project from the boat-shed to Luke’s big thickness planer next door via herring skiff. We then return the dimensioned lumber back to the boat shed. It’s only a short trip across the bay, but grandson, Theo, wasn’t going to miss out on “Hel-pin work on Coe-umbia Twee“.

IMGP6704

Young Theo’s gold locks match the yellow cedar behind him.

IMGP6713

Thin planks for laminating the curved fascia boards.

IMGP6734

Next step? A WHOLE bunch of steaming, bending, and laminating to get the dressy “fascia boards” installed. There must be a better nautical wooden-boat, techie kinda term for these boards, but I don’t know what it is.

IMGP6722

Bending to form a snug fit on the Columbia III.

IMGP6731

Details of Luke’s work.

IMGP6727

IMGP6744

IMGP6747

Meanwhile, life still continues elsewhere . . .

What I really mean is work continues elsewhere on the Columbia III.

Our dear friend, “Webmaster” and “Tech-God” Dave made his usual mid-winter trek to our remote island to tweak our Mothership Adventures computers, which are becoming quite the collection now (2 PC’s, 4 laptops and a crazy collection of wireless gizmos trying to keep everyone in our small bay “connected” through a satellite modem).

Here, Dave installs new satellite telephone software on the ship and gives all the systems a checkup.

IMGP6754

Furthermore, these pesky little additions keep getting sanded and revarnished.

IMGP6740

IMGP6741

I did a “cameo” appearance on the roof project helping Luke out with the new teak hatch combing.

IMGP6753

And Tavish removed (a little too enthusiastically, might I add) 4 of the salon windows for replacement.

IMGP6725

I can guarantee you that the best way to slow down a project is for the glass manufacture to cut, temper, double-pane, seal, and ship 4 new custom shaped windows, sized to the wrong specifications.

I thought that was painful… until it happened twice.

If I have any hair left, it is now 100% grey.

IMGP6655

Finally we got some sealed panes we could work with. Here, two are being pressed into place in a bedding of sealant.

CIIIwindows

After a couple of days curing time, the teak strips are carefully cut, fitted and the glued in place. I hope these last a long time, because tearing these frames apart is a lot of work.

IMGP6784

Meanwhile, Luke doggedly continues to work; getting the final yellow cedar trim pieces in place. Screw holes plugged and lots more sanding to make everything smooth and classy enough for the Columbia III.

IMGP6757

Beginning to look like a roof worthy of the mothership!

IMGP6773

IMGP6771

After 5 months (and bringing a new little girl into the world), Luke says he’s done… For now.

Late one night, he exclaims “She’s ready to paint!”

IMGP6762

THE BIG MOMENT! 

 The first paint goes on the project.

We had better hurry, with only 7 days left before the Columbia III comes out of the shed, when ready or not she heads to the shipyard for her annual underwater inspection.

We need all the bare wood protected from the weather that will surely be dishing out the rain and wind right on schedule for our voyage to town.

Here, Tavish is using a grey primer that is darker than the final finish will be.

IMGP6777

Do you feel the satisfaction of a fresh coat of paint on finely sanded wood like we do?

IMGP6780

And finally…

• (drum roll please) •

The crowning moment of our whole winter, exciting news flashed around the globe, we finally get to turn all that wood to white!

April came down from the cabin one evening to document this historic (though messy) event.

aprilbencze-CIIIroofpaintingmarch2016_1

Father-son-team completing a spring ritual of wood-to-white painting.

aprilbencze-CIIIroofpaintingmarch2016

aprilbencze-CIIIroofpaintingmarch2016_7

aprilbencze-CIIIroofpaintingmarch2016_13

aprilbencze-CIIIroofpaintingmarch2016_3

aprilbencze-CIIIroofpaintingmarch2016_8

The best thing about painting a roof is that it requires many horizontal inspections.

aprilbencze-CIIIroofpaintingmarch2016_10

“Now, Tavish, make sure you don’t stand directly under your paint brush or you’ll end up with paint on your face.” Do as I say, not as I do.

aprilbencze-CIIIroofpaintingmarch2016_9

The painting team: Tavish, myself, and Steve.

aprilbencze-CIIIroofpaintingmarch2016_18

Portraits of the team.

aprilbencze-CIIIroofpaintingmarch2016_17

aprilbencze-CIIIroofpaintingmarch2016_16

aprilbencze-CIIIroofpaintingmarch2016_15

Or for a more accurate group photo:

aprilbencze-CIIIroofpaintingmarch2016_23

We wanted to demonstrate that we had paint coming out of our ears on this job!

aprilbencze-CIIIroofpaintingmarch2016_20

Someone has to say ‘enough is enough’ after a long day.

aprilbencze-CIIIroofpaintingmarch2016_25

Tavish completes the finishing touches.

aprilbencze-CIIIroofpaintingmarch2016_33

A flashback to only a few weeks ago: Luke in all his glamorous glory next to his freshly sanded roof-in-progress.

aprilbencze-boatshed_8

To the roof now – freshly painted white.

aprilbencze-CIIIroofpaintingmarch2016_31

With a freshly constructed and painted roof, we are one step closer to having the Columbia III ready for the 2016 season.

Next step, an adventure to the shipyard!

Til then,

Ross